Think Outside 4.2T Configuring the Mouse to Your Pocket PC Device, Yes, Safe, Safe, Setup, Enhanced, Enhanced, Stowaway Settings, Stowaway Travel Mouse, Choose device to setup

Configuring the Mouse to Your Pocket PC Device

1.After the driver installation completes, the Stowaway Settings screen will display and you will be prompted to Choose device to setup. Select the Stowaway Travel Mouse and tap Setup.

2.The Select mouse pointer mode screen will display for selecting Enhanced or Safe pointer mode:

a.Enhanced mode – Works for most PDAs. Try Enhanced mode first.

b.Safe mode – In the event that display

issues arise with Enhanced mode, select Safe mode. It works for all PDAs, but may leave pointer traces on display.

Prior to selecting a mode, you may want to synchronize your PDA to back up your data.

3.Select Yes at the next screen to reset the PDA and apply the pointer mode.

4.Once the PDA resets, the Confirm mouse pointer mode screen will display. If the PDA display is working properly, accept Enhanced mode by selecting Enhanced again, and tapping OK. Otherwise, select Safe and tap OK.

Stowaway Travel Mouse Owner’s Manual Page 6