Installing and Configuring the Mouse for PPC

Before You Begin

Before you install the Stowaway keyboard and mouse software for Windows Mobile 2003-compatible PDAs:

¾Disable or remove any other keyboard/mouse applications that you have previously installed on your Pocket PC device. (Refer to the User’s Guide included with your Pocket PC device for instruction on how to do this.)

¾Ensure there is at least 400 KB of memory on your Pocket PC device. To check the available memory, tap Start ÎSettingsÎSystemÎMemory.

¾Insert the 2 AAA batteries (included) beneath the battery cover of the Stowaway Travel Mouse and switch to ON.

Installing the Software

1.Connect your Pocket PC device to a computer using the docking cradle or sync cable.

2.Establish a connection between the computer and your Pocket PC device using ActiveSync® and then backup the data stored on the Pocket PC device.

3.Insert the CD enclosed with your mouse and follow the on-screen instructions to successfully install the software.

NOTE: The driver must be installed in Main Memory to function properly.

4.Tap the on-screen button to reset your Pocket PC device to complete the installation.

5.After the driver is successfully installed and the Pocket PC device is reset, the keyboard and mouse driver icons will show up in the Programs window.

NOTE: The Bluetooth connection between the PDA and keyboard must be set up through the Stowaway keyboard/mouse driver.

Stowaway Travel Mouse Owner’s Manual

Page 5