back. Watches are designed to pass ISO test for shock- resistance. However, care should be taken to avoid damaging crystal/lens.

BATTERIES

CHANGING THE WATCH BATTERY

1.Using a coin, insert the coin into the slot on the battery hatch.

2.Unscrew the battery hatch by turning the coin counter- clockwise.

3.Remove plastic frame covering battery.

4.Remove battery from watch.

5.Peel off mylar sticker from old battery and place on new battery.

6.Insert new battery into watch case.

7.Replace plastic frame covering battery.

8.Replace battery hatch.

9.Using a coin, turn the battery hatch clockwise to close.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.

CHANGING THE POD BATTERY

1.Simultaneously push the button on the case back and slide the cover away from the POD.

2.Remove the old battery and insert a new CR2032 battery into the battery compartment.

3.Reinstall the battery hatch.

FCC Notice (U.S.) / IC Notice (Canada):

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi- cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

16

17

Page 10
Image 10
Timex W243 NA, 193-095000-04 manual Batteries, Changing the Watch Battery, Changing the POD Battery