Timex W253, WS4, 810-095009-NA Indiglo NIGHT-LIGHT, Setting and Calibrating Your Reference Points

Setting and Calibrating Your Reference Points

1.Press MODE until CAL is shown.

2.Hold SET to begin the calibration.

3.Press START/SPLIT (+) to scroll among the reference points (HOME ALTI, BASE 1 ALTI, BASE 2 ALTI, BASE 3 ALTI, MANUAL ALTI, BARO, and WEATHER).

4.Press MODE (NEXT) to begin the setting process.

5.Press START/SPLIT (+) or STOP/RESET (-) to increase or decrease setting values.

6.Press MODE (NEXT) to advance to the next setting option.

7.Press SET (DONE).

8. To complete calibration for the selected reference, press and hold STOP/RESET until watch beeps.

9.As your location changes, select a new reference and recalibrate by pressing and holding STOP/RESET.

Note: Use Manual-Altitude (MAN-ALT) for one-time, manual re-calibrations. Use Home Altitude and Base Altitude 1,2,3 to store altitude reference points that will be used multiple times.

Note: If you have already entered a reference point, you can
quickly select that reference point and hold STOP/RESET to	E
quickly calibrate.

INDIGLO® NIGHT-LIGHT

In any mode, when you press the INDIGLO® button, the watch face will light up for easier viewing. You can also activate the Night-Mode®feature if you press and hold the INDIGLO® button until you hear a beep. The Night-Mode®feature is a very useful feature in low light conditions because it allows you to press any button to light the watch for 2 to 3 seconds. Once activated, the Night-Mode®feature stays active for 7 to 8 hours. If you want to deactivate the Night-Mode®feature before 7 to 8 hours have elapsed, press and hold the INDIGLO® button until you hear a beep.

38 39