Sterling 882.00249.00 manual SET Ramp Down TIME? NO/YES, Ramp DN DLY 8.000s Setting for Pump n

Setting the Ramp Down Time

Ramp down time is a delay that allows the pump to come to a full stop when needed. The control cannot restart until this delay is completed. This is also known as the Shutdown delay. This delay defaults to 8.0 seconds and should not be altered unless instructed to do so by the Service Department.

SET RAMP DOWN TIME?

NO/YES

At the above message prompt:

1.Press the YES key to enter the Ramp Down Time menu.

2.Select the pump for altering ramp down time.

SELECT PUMP 1 OR 2

USE KEYPAD TO ENTER

The following screen displays.

RAMP DN DLY: 8.000s

SETTING FOR PUMP n

Using the keypad:

3. Enter the new time and press the ENTER key to save the new setting.

2–Pump 12-Station Controllers Chapter 8: Service Only Information 58