Sterling 882.00249.00 manual Station 10 Pump Select Pump 1 or

To assign a station to a pump:

1.Press the related station ST key. The following menu screen displays:

STATION 10: PUMP 1

SELECT PUMP 1 OR 2

To assign Pump 1 to the station you selected:

•Press 1.

Instead of assigning Pump 1 to the station you selected, you can assign Pump 2:

•Press 2.

To save the new setting and display the Station Assignment screen:

•Press the ENTER key.

To save the new pump assignment and increment to the next station sequence:

•Press the SET key.

To exit the Station Settings menu:

1.Press the CLEAR key.

2.Press the CLEAR key repeatedly to exit to the next higher menu, or to exit the menu system.

Caution! You must assign the correct pump to a hopper before starting the conveying process.

Failure to properly assign pumps can result in damage to the conveying system!

2–Pump 12-Station Controllers Chapter 3: Installation 26