Sterling 882.00249.00 manual Section, Controller Description and Operation, Text Area

2.Using number keys 1 to 0, enter the new time.

3.Press the ENTER key to save the new setting into controller memory. If several stations require altering:

1. Press the SET key instead of the ENTER key.

The new settings are saved and the station number increments to the next station in sequence. Press the SET key without entering a value to retain the original value in controller memory.

The load time range of the station is from 1 to 360 seconds. Entering values beyond this range result in the screen displaying three (3) question marks (???).

To abort this erroneous entry and return to normal operation mode: 1. Press the CLEAR key.

Enabling and Disabling Individual Stations

Except while you are in the menu system and when you are altering system parameters, you can enable or disable any station in the system.

To enable or disable a loading station:

1.Press the STnn key (where nn is the station number you want) to toggle between station enable or disable mode.

4-2 Controller Description and Operation

Your 12-station controller system has been designed for quick setup and easy, low maintenance operation. Before you begin operation, make sure you become familiar with the functions and features of your controller.

The controller screen displays the status of the controller at any given time. By a simple glance, you can know exactly what the controller is doing. The screen has three areas:

•Text area, a 2-line, 20-character screen

•Station icons for displaying the status of each individual station

•Status indicators for displaying the operation of the pump.

Text Area

The text area is separated into four (4) sections. The appearance of the screen depends on the setting of the Pump mode.

SECTION 1 SECTION 2

SECTION 3 SECTION 4

2–Pump 12-Station Controllers Chapter 4: Operation 35