The screen displays the station you selected (11 in the above example), and the current dump delay time setting. Using number keys 1 to 0, enter the new dump delay time (in seconds) into controller memory. Keep in mind that the value shifts to the left as you enter. Use the 0 key to shift to the next multiple of ten.

To exit from the Dump Delay menu and return to the Station Settings menu:

Press the CLEAR key.

To save the new value and escape from the Dump Delay menu:

Press the ENTER key.

To save the new value to the controller memory and increment to the next station in the sequence:

Press the SET key.

If you press the SET key without entering a value, the original value is retained and the controller moves to the next station in the sequence.

Set Input Delay, Station Settings Menu

The third submenu under Station Settings is the Set Input Delay submenu. To set input delay time:

Press the YES key. The following screen displays.

SET INPUT DELAY?

NO/YES

The Input Delay function protects the system from erroneous inputs caused by noise or mechanical vibration. The signal must be present for the input delay time setting duration for the input to be recognized.

To alter input delay time:

Press the YES key. The following screen displays.

TO SELECT A STATION

PRESS STATION <1-12>

2–Pump 12-Station Controllers

Chapter 3: Installation

22

Page 23
Image 23
Sterling 882.00249.00 manual SET Input DELAY? NO/YES, Set Input Delay, Station Settings Menu