Targus Wireless Comfort Laser Mouse
GB – Introduction
Thank you for your purchase of the Targus Wireless Comfort Laser Mouse. The accompanying micro USB receiver is small enough to leave plugged into your computer or simply store it inside the mouse when travelling. This is a plug and play device so no additional software is required. The advance scroll wheel feature program can be downloaded from the Targus website.
Contents
•Targus Wireless Comfort Laser Mouse
•2 x AA Batteries
•Micro USB Receiver
•User Guide
System Requirements
Hardware
• USB port
Operating System
•Microsoft Windows® 2000
•Microsoft Windows® XP
•Microsoft Windows Vista®
•Microsoft Windows® 7
•Mac OS® X 10.4 or later
6
Targus Wireless Comfort Laser Mouse
Installing the Batteries
1.Remove the battery cover from the top of the mouse by using the notch on the back. Carefully lift the cover up as shown in the diagram.
2.Remove the battery safety clip by squeezing the center of the clip and sliding it back, towards the rear of the mouse. Lift up and rotate the clip out of the way.
NOTE: THE BATTERY SAFETY CLIP WILL NEED TO BE IN THE SECURE, LOCKED POSITION BEFORE THE BATTERY COVER CAN BE PUT BACK IN PLACE.
7
