TOA Electronics A920 manual Using Call Name or #, Voice Launch, Calling Contacts Entries

Voice Launch

Voice Launch allows you to configure how to launch Voice-Activated dialing.

To access voice launch:

1.Press Menu > Settings > Voice Service.

2.Select Voice Launch and press .

3.Select Talk Key or Talk Key and Flip Open and press .

Using Call <Name or #>

You can voice dial from your phone with a single command by saying “Call” followed by a name or nickname (see contact list documentations for details) and (optionally) a label stored in your contact list, or “Call” followed by a valid phone number. You can also say “Call” by itself and be prompted for the name or number.

Calling Contacts Entries

To place a call using Call <Name or #>:

1.Press and hold .

2.Say “Call” followed by the name and the label for that number. For example, say “Call John Mobile.” The phone dials the number stored for the contact “John” with the label “Mobile.”

If the location recognized for the name does not have a number stored in Contacts, VoiceSignal will play the message “No number available, John Smith, Mobile,” and then launch the Contacts application for that name.

Voice Services

Section 2H: Using Your Phone’s Voice Services 109