TOA Electronics A920 manual Printing Pictures Using PictBridge, Printing From Your Phone

Printing Pictures Using PictBridge

PictBridge is an industry standard established by the Camera

&Imaging Products Association (CIPA) that enables a range of digital photo solutions, including direct photo printing from a digital camera to a printer without the need for a PC.

Printing From Your Phone

The A920 comes equipped with a built-in camera that allows you to print images directly to a printer using the PictBridge technology. A USB cable must be connected between the two devices before any printing can occur.

To use PictBridge to print pictures from your phone:

1.Insert one end of the accessory cable into the USB slot on the printer. (Printer must support PictBridge technology.)

2.Select Menu > Pictures > PictBridge Print.

3.Insert the USB cable into your phone.

4.Read the Connect Printer message and select OK ( ).

5.Highlight the desired image and select Next ( ). (To

select multiple images, press to place a check mark next to each image selected.)

6.Highlight Copies and press the navigation key left or right to select the desired number of copies to print.

7.Press the navigation key down to select Type. Press the navigation key left or right to select one of the following:

■Standard: prints the standard image.

■Index: prints the index information.

Camera

Section 2J: Using the Built-in Camera 147