TOA Electronics C-CC764 BC711P, BC711W, A711DM, BC511A, BC511C-S, BC511P, BC511W, BC511U

Brackets and Dome Cover for C-CC764/C-CC-714 (Outdoor Use)

	C-BC711P
	Suspension Bracket
	The C-BC711P is exclusively designed to be
	used to suspend TOA's outdoor
	combination camera from a ceiling or eaves.
Finish	Base: Aluminum, light gray, paint
	Pipe: Stainless steel (SUS304)
Dimensions	140 (W) ⋅ 164 (H) ⋅ 200 (D)mm
Weight	1kg
Accessory	Camera mounting screw (M5⋅12, with washer) ⋅ 3

Note: pay attention to the strength of the attaching portion.

	C-BC711PM
	Pole Mounting Bracket
	Using the optional YS-60B and C-BC711W, the
	C-BC711PM can mount the outdoor combination
	camera on a pole.
Finish	Stainless steel (SUS304)
Dimensions	140 (W) ⋅ 200 (H) ⋅ 60 (D)mm
Weight	700g

	C-BC711W
	Wall Mounting Bracket
	The C-BC711W is designed to be used to
	mount TOA's outdoor combination camera
	on a wall.
Finish	Base: Aluminum, light gray, paint
	Pipe: Stainless steel (SUS304)
Dimensions	140 (W) ⋅ 240 (H) ⋅ 188.1 (D)mm
Weight	1.3kg
Accessory	Camera mounting screw (M5⋅12, with washer) ⋅ 3

Note: pay attention to the strength of wall surface.

C-A711DM

Smoked Dome Cover

The C-A711DM Smoked Dome Cover is specially designed to be used in conjunction with TOA's Combination Cameras. The Dome Cover is used to make it difficult for individuals to see the camera's orientation.

Transmissivity	Approx. 30%*
Finish	Dome: PC resin, smoked
	Frame: PC resin, light gray
Dimensions	ø219.8 ⋅ 128 (H)mm
	(Dome external diameter: ø150mm)
Weight	400g

*As a general guideline, the minimum object illumination of the camera equipped with the Smoked Dome Cover is approximately 3.3 times that of the camera without the cover.

Note: Be careful when installing the camera with this cover in low illumination location as the cover may cause camera sensitivity to decrease.

Note: Reinforce the pole mounting bracket and mounting band separately for security when installing the camera in locations exposed to vibration or strong winds.

Maintenance the unit, mounting bracket and mounting band periodically to ensure that there are no loose joint nor rickety parts.

Brackets and Dome Cover for C-CC564/C-CC-514 (Indoor Use)

C-BC511A

Anchor Bracket

The C-BC511A is specially designed to mount TOA's Combination Cameras directly on the wall. The bracket facilitates mounting of the camera on the

plasterboard in the double ceiling or other locations where the mounting screws cannot be installed securely.

Finish	Surface-treated steel plate, black, paint
Dimensions	132 (W) ⋅ 30 (H) ⋅ 70 (D)mm
Weight	1.1kg
Accessory	Camera mounting screw ⋅ 4, Safety wire ⋅ 1, Paper pattern ⋅ 1

C-BC511C

Ceiling Mount Cover

The C-BC511C is a camera installation cover designed solely for mounting TOA's

Combination Cameras. The cover is used when mounting the Combination camera directly to a

ceiling or wall or suspending it from the ceiling. The cover is used to make it difficult for individuals to see the camera's orientation.

Finish	Case: PC/ABS resin, cool gray
	Dome cover: Acrylic resin, transparent
Dimensions	ø168 ⋅ 182.2 (H)mm
	(Dome external diameter: ø125mm)
Weight	220g

C-BC511C-S

Ceiling Mount Cover (Smoked)

The C-BC511C-S is a camera installation cover designed solely for mounting TOA's Combination Cameras. The cover is used when

mounting the Combination camera directly to a ceiling or wall or suspending it from the ceiling. The cover is used to make it difficult for individuals to see the camera's orientation.

Transmissivity	Approx. 20%*
Finish	Case: PC/ABS resin, cool gray
	Dome cover: Acrylic resin, smoked
Dimensions	ø168 ⋅ 182.2 (H)mm
	(Dome external diameter: ø125mm)
Weight	220g

*As a general guideline, the minimum object illumination of the camera equipped with the Ceiling Mount Cover is approximately 5 times that of the camera without the cover.

Note: Be careful when installing the camera with this cover in low illumination location as the cover may cause camera sensitivity to decrease.

	C-BC511P
	Ceiling Suspension Bracket
	The C-BC511P is a Ceiling Suspension Bracket
	designed solely for suspending TOA's
	Combination Cameras from the ceiling.
Finish	Top cover: PC/ABS resin, cool gray
	Pipe: Stainless steel (SUS304)
	Bracket: Surface-treated steel plate, black, paint
Dimensions	ø150 ⋅ 233mm
Weight	1.2kg
Accessory	Top cover ⋅ 4, Safety wire ⋅ 1, Pattern paper ⋅ 1

C-BC511W

Wall Mounting Bracket

The C-BC511W Wall Mounting

	Bracket is specially designed to mount
	TOA's Combination Cameras to wall
	surfaces. Install the unit only in a location
	that can structurally support weight of the
	unit and camera.
Finish	Top cover: PC/ABS resin, cool gray
	Pipe: Stainless steel (SUS304)
	Bracket: Surface-treated steel plate, black, paint
Dimensions	150 (W) ⋅ 203 (H) ⋅ 203 (D)mm
Weight	1.1kg
Accessory	Top cover ⋅ 4, Safety wire ⋅ 1, Paper pattern ⋅ 1

C-BC511U

Flush Ceiling Mounting

Bracket

The C-BC511U bracket is designed to be exclusively used for flush ceiling mounting

of TOA's combination camera. Use this bracket when mounting the camera to the ceiling surface where the fixing screws cannot be securely installed, such as on

the plaster panel of the dual-construction ceiling. Also, use this bracket to minimize the exposure of the camera.

Finish	Bezel: PC/ABS resin, cool gray
	Dome cover: Acrylic resin, transparent
	Bracket: Aluminum, black, paint
	Surface-treated steel plate, black, paint
Dimensions	ø250 ⋅ 282.7 (D)mm
	(Dome external diameter: ø125mm)
Weight	1.2kg
Accessory	Safety wire ⋅ 1, Paper pattern ⋅ 1

C-BC511U-S

Flush Ceiling Mounting

Bracket (Smoked)

The C-BC511U-S bracket is designed to be exclusively used for flush ceiling

mounting of TOA's combination camera.

Use this bracket when mounting the camera to the ceiling surface where the fixing screws cannot be securely installed, such as on the plaster panel of the dual-construction ceiling. Also, use this bracket to minimize the exposure of the camera. The bracket is used to make it difficult for individuals to see the camera's orientation.

Transmissivity	Approx. 20%*
Finish	Bezel: PC/ABS resin, cool gray
	Dome cover: Acrylic resin, smoked
	Bracket: Aluminum, black, paint
	Surface-treated steel plate, black, paint
Dimensions	ø250 ⋅ 282.7 (D)mm
	(Dome external diameter: ø125mm)
Weight	1.2kg
Accessory	Safety wire ⋅ 1, Pattern paper ⋅ 1

*As a general guideline, the minimum object illumination of the camera equipped with the

Flush Ceiling Mounting Bracket is approximately 5 times that of the camera without the bracket.

Note: Be careful when installing the camera with this bracket in low illumination location as the cover may cause camera sensitivity to decrease.