Cleaning the Filter, Removing the Handle | TOA Electronics IP-600D

8. CLEANING THE FILTER

1.Switch off the amplifier power.

2.Pull the filter from the front panel as shown in the figure.

3.Clean the filter.

4.Fit the filter in place.

[Precautions] Make sure that the fan is turned off when removing the filter.

Filter

9. REMOVING THE HANDLE

1.Switch off the amplifier power.

2.Remove the handle cover.

3.Remove two screws holding the handle to the amplifier.

4.Remove the handle.

5.Install the supplied screws (M4x20).

6.Attach the handle cover to the unit.

Handle

Handle cover

Handle cover

9

Image 9

TOA Electronics IP-600D, IP-300D, IP-450D dimensions Cleaning the Filter, Removing the Handle

Contents

Operating Instructions IP Series Power supply plug from the AC outlet Safety PrecautionsDamage May cause fire or electric shock Parts inside the product are a risk When unplugging the power supply cord, be sure Handling Precautions FeaturesGeneral Description Can be reduced Front Panel Nomenclature and Functions Rear panel Installation Connections Removing the Handle Cleaning the Filter Block Diagram Installing AN Optional Matching Transformer LT-101 Table for Protection Circuit Actions Appearance and Dimensions Cooling Fan Speed Connection Terminal Specifications