PowerConnect B-FCX Switch Hardware Installation Guide 55
53-1002267-01
Replacing a copper or fiber optic module 4
FIGURE 36 Unlocking the bail latch
FIGURE 37 Removing the bail latch
NOTE
The bail latch may be attached to either the top or the bottom of the mini-GBIC.
4. Grasp the bail latch and pull the copper or fiber optic module out of the port.
FIGURE 38 Remove fiber optic module
5. Store the copper or fiber optic module in a safe, static-free place or in an anti-static bag.
6. Install a new copper or fiber optic module in the port.
Cabling a fiber optic module
For instructions on cabling a fiber optic module refer to “Cabling a fiber optic transceiver” on
page 42.
Cleaning the fiber optic connectors
For instructions on cleaning a fiber optic module refer to “Cleaning the fiber optic connectors” on
page 43.
1Bail Latch
1