Dell B-FCX manual Unpacking the device, Package contents, General requirements

	Chapter
Installing the PowerConnect B-FCX Switch	2

CAUTION

The procedures in this manual are intended for qualified service personnel.

CAUTION

Before beginning the installation, see the precautions in “Power precautions” on page 17.

Unpacking the device

PowerConnect B-FCX devices ship with all of the items listed below. Verify the contents of your shipping container. If any items are missing, please contact the place of purchase.

Package contents

The following items are included in your shipping carton:

•PowerConnect B-FCX device

•115V AC PDU power cords(C13- C14) (for AC sourced devices)

•PowerConnect B-FCXs devices ship with a .5M CX-4 stacking cable

•Rack mount kit

•Document Kit

•Rubber feet Kt

•Retainer nuts and screws

•Warranty card

•A straight-through EIA or TIA DB-9 serial cable (F/F). If you prefer to build your own cable, see the pinout information in “Attaching a PC or terminal” on page 25.

General requirements

To manage the system, you need a management station, such as a PC running a terminal emulation application. Connect the management station to the Console serial port on the switch.

Use the serial connection to perform basic configuration tasks, including assigning an IP address and network mask to the system. This information is required to manage the system using the Web management interface or Brocade Network Advisor or using the CLI through Telnet.

PowerConnect B-FCX Switch Hardware Installation Guide	15
53-1002267-01