WARNING: When using the Blender, make sure the Lid is locked
into position. The Blender will not operate unless the Lid is properly secured.
NOTE: Do not fill the Blending Jar more than 3/4 full, 6.5 cups
6. Plug the power cord into a 120V AC electrical outlet. Turn the Speed Control Dial to the desired speed setting: 1 is the lowest speed; 3 is the highest. Blend until ingredients have reached desired consistency.
REMEMBER: Always hold Lid in place during processing.
CAUTION: If Blending Jar rotates during blending, immediately turn Speed Control Dial to “0”, the OFF position; then secure by tightening the Blade Assembly on Blending Jar.
•Do not touch Blades
•Do not interfere with the Blade movement
•Do not remove Blending Jar Lid
7.When blending is completed, turn the Speed Control Dial to “0”, the OFF position to stop the Blender. Unplug the unit.
8.Use the Handle to lift the Blending Jar off the Base.
Turn the Blending Jar Lid to | Strainer | Pour |
either the strainer or the | position | position |
pour position to serve from |
|
|
the Jar. (See Figure 4.) |
| Figure 4 |
|
|
Pulse Button
1.Press the PULSE Button in short bursts until the food is processed to your desired consistency.
2.When pulsing is completed, make sure the Speed Control Dial is at “0”, the OFF position, and unplug the unit.
Crushing Ice
Add 1 cup of ice cubes, about 9, to the Blending Jar. Place the Lid on Blending Jar then repeatedly press the PULSE Button until the cubes are reduced.
Hot Ingredients
CAUTION: Use extreme caution when blending hot liquids to avoid accidental scalding or burns. Do not use your hand to cover opening!
NOTE: When processing hot foods, always remove the Measuring Cap from the Lid before beginning.
•DO NOT put more than 1 cup of hot ingredients into the Blending Jar before beginning to blend.
•After the blending process has begun, you may slowly add up to an additional 1 cup of hot ingredients through the center hole in the Lid.
•Always use a vessel with a pouring spout when adding hot ingredients.
5