User Maintenance Instructions

This 3 Speed Blender with Chopper Attachment requires little mainte- nance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing requiring disassembly must be performed by a qualified appliance repair technician.

CAUTION: Never immerse the Motor Housing, Gear Box, plug or cord in water or any other liquid.

1.Always unplug the unit before cleaning.

2.Whenever possible, rinse parts immediately after processing to make cleanup easier.

CAUTION: Use extreme care when handling the Blade Assemblies. Do not touch the Blades with your fingers. The Blades are very sharp and can cause injury if touched.

3.Wash the Blender Container, Lid, Measuring Cap, Blade Assemblies, Chopper Cover and Chopper Container in warm soapy water. Rinse and dry thoroughly. Never use rough scouring pads or abrasive cleansers on any plastic or metal parts as the surface may be damaged. Do not wash in the dishwasher.

4.If necessary, wipe exterior surfaces with a moist cloth or sponge and dry thoroughly.

5.Do not fill the Blender Container with boiling water or place any of the parts in boiling water.

6.Do not allow either Blade Assembly to soak in water for long peri- ods of time.

7.Quick clean-ups of the interior of the Blender Container can be made by using the Pulse setting. Plug the Blender into an electrical outlet then pour some warm water and a small amount of deter- gent into the Blender Container. Repeat for several short bursts. The unit will clean itself without you having to handle the sharp Blades. Unplug the Blender, rinse and dry thoroughly, being careful as the Blades are sharp.

8.Properly reassemble all parts before storing.

STORAGE

CAUTION: Always assemble clean Blender/Chopper parts correctly before storing on the Motor Housing. Severe injury can result if Blender is accidentally turned ON when not properly assembled.

Unplug and clean unit. Store in original box or in a clean, dry place. Never store Blender while it is hot or plugged in. Never wrap cord tightly around the appliance. Never place any stress on cord, especially where the cord enters the unit, as this could cause the cord to fray and break.

10