Chopper

CAUTION: Use extreme care when handling the Chopper Blade. Do not touch Blades with your fingers. The Blades are very sharp and can cause injury if touched.

1.Before starting, make sure power cord is unplugged and Control Dial is in the (0) OFF position.

2.Place the Chopper Container on the Chopper Gear Box and align the locking tabs. Hold the Chopper Gear Box and turn the Chopper Container clockwise to lock the two pieces together.

3.Place the Chopper Blade over the center extension in the Chopper Container.

4.Add ingredients to the Chopper Container. Pre-cut larger pieces into small pieces. Do not overfill. Never operate when the

Chopper Container is empty.

5.Place the Chopper Cover on the Chopper Container, making sure that the pin extending down from the Chopper Cover enters the hole in the Chopper Blade. Align the locking tabs. Hold the Chopper Container and turn the Chopper Cover clockwise to fully lock it in place.

6.Place the Food Chopper Assembly on the Motor Housing, making sure it is fully seated and not tilting to one side.

CAUTION: Never place the Food Chopper on the Motor Housing without the Container being completely assembled and securely tightened.

7.Make sure the Control Dial is in the (0) OFF position then plug the power cord into a 120V AC electrical outlet.

8.Place one hand firmly on top of the Food Chopper and turn the Control Dial to the desired speed, P, 1, 2 or 3.

9.When chopping is complete, turn the Control Dial to the (0) OFF position and disconnect plug from electrical outlet.

10.Clean unit as instructed in the "User Maintenance Instructions."

NOTE: The Food Chopper is not suitable for chopping hard spices, hard cheese, coffee beans, ice cubes or rice.

9