Instructions For Use (Cont.)

5.Add ingredients to the Blender Container and secure the Lid by turn- ing it clockwise to engage the locking tabs. NOTE: Do not fill the Container more than 3/4 full, 4.5 cups (36 oz.). Never operate when the Container is empty.

6.Insert the Measuring Cap into the center of the Lid and turn it about 1/4 turn (clockwise or counter clockwise) to engage the locking tabs. The Measuring Cap may be removed as needed to add additional ingredients during processing. However, when processing hot foods

or liquids, remove the Measuring Cap TM to prevent pressure build-up.

7.At the start of the blending process, the powerful motor may cause the liquid to surge against the Lid and cause leakage. To prevent leak- age, as well as steadying the unit, place one hand firmly on top of the Lid and select your desired blending speed. Never lean over the Blender when it is started or while it is running. Remember to always hold the Lid during use.

8.Plug the power Cord into a 120V AC electrical outlet. Turn the Control Dial to the desired speed setting: 1 is the lowest speed; 3 is the high- est. Blend until ingredients have reached desired consistency.

CAUTION: If Container rotates during blending, immediately turn Control Dial to (0) OFF, then secure by tightening the Collar and Blade Assembly on Blender Container.

9.When blending is complete, turn Control Dial to the (0) OFF and remove the plug from the electrical outlet.

10.Clean unit as instructed in the "User Maintenance Instructions."

Crushing Ice

Add 1 cup of ice cubes, about 9, to the Blender Container. Place the Lid on Blender Container then repeatedly turn the Control Dial to (P) Pulse and release. Repeat until the cubes are reduced. This will yield one serv- ing, about 1 cup.

Hot Ingredients

CAUTION: Use extreme caution when blending hot liquids to avoid accidental scalding or burns. Do not use your hand to cover opening!

NOTE: When processing hot foods, always remove the Measuring Cap from the Lid before beginning.

•DO NOT put more than one cup of hot ingredients into the Blender Container before beginning blending.

•After the blending process has begun, you may slowly add up to an additional 1 cup of hot ingredients through the center hole in the Lid.

•Always use a vessel with a pouring spout when adding hot ingredi-

8