MDR 24/96
Solo (Remote Only): This choice is available for the Remote Footswitch but not for the MDR24/96 Footswitch. Although you cannot solo a track on the MDR directly, it can be soloed with a footswitch attached to a Remote 24. The footswitch solos the channel displayed in the Track Number window on the Remote 24. The meters on the MDR24/96 will continue to display signal on all of the tracks with audio, but the MDR24/96 will output audio from only the soloed track. Press the footswitch again with the same track selected to disengage the solo function and to return the MDR24/96 to regular operation. You can also select a different channel on the Remote 24 and press the footswitch to solo that channel instead.
To change footswitch function for the MDR24/96 or a Mackie Remote:
1. Press the front panel SYSTEM button.
<-
SYSTEM
MENU
[2]
SYSTEMMENU[2]2. Press the Right Arrow button to move to
the second page.Footswitch
MDR Remote
Clock
About
3.Now press either the Footswitch MDR or the Footswitch Remote select button.
4.Use the << and >> select buttons to change the assignment of the selected footswitch. Press the OK select button to choose a setting. The MDR 24/96 has four functions that can be assigned to the footswitch; the remote adds a fifth.
Footswitch
ANALOG I/O ANALOG I/O ANALOG I/O | ||
OUTPUT | OUTPUT | OUTPUT |
|
| M |
INPUT | INPUT | INPUT |
TAPE IN/OUTS
44 | MDR 24/96 |
|