MAINTENANCE
EMPTYING DUST TANK
When Dust Full Indicator light activates, the Dust Tank needs to be emptied. The following steps should be taken:
1.Turn ThunderVac off and unplug from wall outlet.
2.Disconnect Hose from Intake Hole.
3.Remove Dust Tank by pushing Dust Tank Release Button (FIGURE 1).
4.Remove Filter Assembly by grasping and pulling Handle (FIGURE 2).
5.Empty Dust Tank into trashcan or other receptacle (FIGURE 3).
6.Insert Filter Assembly back into Dust Tank.
7.Reattach Dust Tank to main unit body.
FIGURE 1 | FIGURE 2 | FIGURE 3 |
CLEANING AND REPLACING FILTERS
To prolong the effective life of the three filters and maintain maximum performance of unit, it is recommended that you clean these filters regularly. To do this, run them under cool or lukewarm water and thoroughly rinse them out. DO NOT use hot water to rinse the filters.
IMPORTANT: Allow all filters to dry COMPLETELY before placing them back in unit to avoid moisture damage.
-RINSE ONLY; do not place filters in washing machine or dishwasher.
-AIR DRY ONLY; do not dry using hair dryer or other appliance.
REPLACING FILTERS
We recommend replacing filters every
Top Innovations, Inc. | 9 |