Topaz Systems AM10 manual Front panel controls

Models: AM10

1 10
Download 10 pages 30.84 Kb
Page 6
Image 6

Front panel controls

AM10

Integrated

Amplifier

6

8

On / Off

Phones

 

MP3 In

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

1

2

3

4

MP3 / Aux

CD

Tuner5/ DAB

Phono

BD / DVD

Menu

Volume

1Power On/Off

Switches the unit on or off.

2Headphones socket

Allows for the connection of stereo headphones with a ¼ inch jack plug. Headphones with an impedance of between 32 and 600 ohms are recommended.

Note: Plugging in headphones will automatically mute the loudspeaker outputs.

3Infrared sensor

Receives IR commands from the supplied remote control. An unobstructed line of sight between the remote control and the sensor is required.

4MP3 input socket

This source input allows you to connect a portable audio device such as an MP3 player directly into the front of the unit using a 3.5mm stereo-jack. Once plugged in, this input is automatically selected, although other inputs can still be selected once a stereo-jack is plugged in. The MP3/AUX button on the front of the unit will select this input whilst a stereo-jack is plugged in.

Note:

Plugging a source into the front panel MP3 input overrides the Aux input. Simply remove the jack from the front panel to automatically re-enable the Aux input.

Also note that as the output level of MP3 players tends to be quite low, the AM10 adds 10dB to the current volume setting when (and only when) the MP3 input is selected.

5 Input source buttons (MP3/Aux, CD, Tuner/DAB, Phono, BD/DVD)

Press the relevant source button to select the desired input source.

6Display

Used to display information such as the selected input source, volume and tone/balance levels.

Note: When first purchased, the display will have a protective film over the top. Peel this off for a clear display.

7Menu button

Pressing this once will select the Bass option. Pressing a second time will select the Treble option and pressing a third time will select the Balance option. When one of these options is selected, the volume control will adjust the level. If nothing is pressed for a while, the source will be displayed and the volume control will go back to controlling the volume level.

8Volume control

Use to increase or decrease the level of the sound from the outputs of the unit. This controls the volume level of the loudspeakers and headphones. It does not affect the level of the ‘Rec Out’ output. The volume control will also change the level of bass, treble and balance in the menu options.

6

Page 6
Image 6
Topaz Systems AM10 manual Front panel controls