COCOON 115 7
ENGLISH
ENGLISH
5OPERATION TELEPHONE

5.1 Outgoing calls

5.1.1 Making a phone call

•Press the Line button . You will hear the dial tone.
•Enter the desired telephone number.
•Press the ON-hook button when you want to terminate the call.

5.1.2 Call setup with dial preparation

•Enter the desired telephone number. An incorrect number can be corrected by means of
the Mute button . When you haven’t pressed a button for 20 seconds, the number
you’ve already entered will disappear and the handset returns to stand-by mode.
•Press the Line button . The number will be dialled automatically.
•Press the ON-hook button when you want to terminate the call.

5.2 Incoming calls

•When a call comes in, only the handset will start to ring. The PHONE symbol blinks
on the display and the Line indication (LED) will blink on the base.
•Press the Line button to answer the incoming call.
•When you pick up the handset from the base unit you are immediately connected to the
caller. You do not need to press the Line button . This function has to be programmed
before it can be used (see 5.14 Automatic answering).

5.3 Last number redial

•Press the Redial button . The last number dialled appears on the display.
•Press the Line button . The number will be dialled automatically.
•Press the On-hook button when you want to terminate the call.

5.4 Programming memory numbers

You can program 10 indirect numbers (of max. 24 digits) in the phone’s memory.
•Press the Set button , followed by the Memory button .
•Enter the memory location (0-9).
•Enter the telephone number you wish to save on this memory location.
•Press the Memory button . You will hear a confirmation tone.

Remarks:

•All memory numbers will be erased when the default settings have been reset

(see 5.15 Default settings).

•If you wish to insert a pause, press the Redial button

/P

on the location where

you want a pause (see also ‘5.16 Setting the pause length’).

5.5 Calling a memory number

•Press the Line button .
•Press the Memory button , followed by the number of the memory location (0-9).
•The memory number will be dialled automatically.
•Press the On-hook button when you want to terminate the call.

5.6 Mute function

It is possible to deactivate the microphone during a conversation. Now you can speak openly
without being heard by your correspondent.
HL_coc115_GB.fm Page 7 Monday, January 13, 2003 11:41 AM