Topcom 1410 manual Switching the hands-free function on/off, Setting the speaker volume, Butler

Butler 1410

-The 2nd handset will only be automatically called if 2 handsets are subscribed. If more than 2 handsets are subscribed:

•'INT XXXXX' appears on the display. XXXXX are the numbers of the handsets which can be called (e.g. 'INT-23--' only handset 2 and 3 can be called).

•Dial the number of the handset you would like to call. Or press the ‘BACK’ key (Softkey 1) to leave the menu.

-After finishing your call, press the Line key to hang up or put the handset back on the base unit.

4.5. Switching the hands-free function on/off

This function allows you to have a telephone conversation without holding the receiver.

There are two ways of activating the hands-free function:

1. During a call:

-Press the Menu key during a call.

-‘HANDSFREE’ appears on the display.

-Press the 'ON' key to activate the hands-free function or press 'BACK' to go back.

-Press the 'OFF' key to switch off the hands-free function.

Caution: Using the hands-free function for a long time causes the battery to drain faster.

2.When the handset is placed in the charger:

-Press the Line key and the telephone will automatically accept the call in hands-free mode. When you take the handset out of the charger, hands-free mode automatically switches to normal calling.

4.6.Setting the speaker volume

Use the Volume key to set the volume of the speaker (handset). You can choose from 3 levels: Volume 1, 2 and 3.

During a call, you can change the volume as follows:

-Repeatedly press the Volume key.

-The current volume level appears on the display.

4.7. Call Duration Indicator on the Display

During a call the call duration appears on the display (hours:minutes:seconds). E.g. " 01:02:30" for 1 hour, 2 minutes and 30 seconds.

The call duration remains visible on the display for 5 seconds after each call.

71