Butler 1410
The Line indicator will blink for one minute. During this minute, the base unit is in subscribing mode and you must do the following to subscribe the handset:
-Press the 
key once.
-Press the OK key and choose a base unit 
keys.
-Press the OK key.
-Enter the pin code of your base station (0000).
-Press the OK key. The Butler 1800T now searches for your DECT base unit. As soon as it finds it, you will see the identification code of this base unit on the display.
-Press the OK key to confirm your selection or press the Esc key to cancel.
4.20. Removing subscription of a handset to a base unit
It is possible to cancel a subscription of a handset with a base unit. You would do this if a handset is damaged and has to be replaced by a new one.
-Repeatedly press the Menu key until 'TELEPHONE' appears.
-Press the OK key.
-Repeatedly press the Menu key until ‘SUBSCRIBE’ appears.
-Press 'OK' or ‘BACK’ to go back.
-Repeatedly press the Menu key until ‘UNSUBSCR HS’ appears.
-Press 'YES' or ‘BACK’ to go back.
-Enter the base unit PIN code (0000).
-The numbers of the registered handsets appear on the display (e.g. 'HS:
-Enter the number of the handset you want to remove
-Repeatedly press the 'BACK' key to leave the menu.
4.21.Removing subscription to Base unit It is possible to cancel a base unit subscription.
-Repeatedly press the Menu key until 'TELEPHONE' appears.
-Press the OK key.
-Repeatedly press the Menu key until ‘SUBSCRIBE’ appears.
-Press 'OK' or ‘BACK’ to go back.
-Repeatedly press the Menu key until ‘UNSUBSCR BS’ appears.
-Press 'YES' or ‘BACK’ to go back.
-The numbers of the registered base stations appear on the display (e.g. 'BASE:
-Enter the number of the base unit you want to remove
-Repeatedly press the 'BACK' key to leave the menu.
80
