Topcom 270 manual Before Initial use, Cleaning, Disposal cautions

Topcom Allure 270

1 Before Initial use

Thank you for purchasing this new desktop caller ID telephone.

1.1Intended Purpose

This product is intend to be connected indoor to an analogue PSTN telephone line.

1.2Caller ID

Caller ID is a network provider service. After subscribing to Caller ID, this phone will display the caller’s phone number.

To use ‘Caller ID’ (display caller), this service has to be activated on your phone line. Normally you need a separate subscription from your telephone company to activate this function. If you don’t have the Caller ID function on your phone line, the incoming telephone numbers will NOT be shown on the display of your telephone.

1.3Connection

This device has been designed and manufactured to comply with the 98/482/EC rule, referent to the Pan European connection of a terminal to the Public Switching Telephone Network (PSTN) and following the established guidelines by the 1999/5/EC Directive about radio electric equipments and the reciprocal acknowledge of their conformity. However, due to the fact that there are some differences in the PSTNs from one country to another, the verifying measurements by themselves do not set up an unconditional guarantee for an optimal working in every connection point to the PSTN of any country .If any problem comes up, get in touch firstly with the distributor.

In any case, use conditions for which the product has been created should be respected as well as avoid its use in public or private networks with technical requirements clearly different to those established in the EU.

2 Cleaning

Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents.

3 Disposal cautions

•Dispose of batteries and maintain the telephone in an environment-friendly manner.

•You have to dispose of batteries in an environment friendly manner according to your country regulations.

ENGLISH

Topcom Allure 270 23