Topcom Allure 270
1.Press 
. The desired number will be dialled automatically in handsfree.
2.Pick up the receiver. The number will be dialled automatically.
Note: The Redial button 
can also be used as a Pause button while entering a telephone number !The letter ‘P’ appears on the display on the location where you have added a pause of 3 sec.
8.5Music on hold
It is possible to put the caller on Hold during a conversation by pressing 
. You can now talk freely without the caller hearing you. The caller will hear a digital melody. The melody can be changed by pressing 
or 
.
Press the Music on Hold button 
again if you want to resume your conversation.
8.6Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be adjusted by means of the Ring Volume switch at the back of the phone (Hi- 
, Lo- 
). (24)
8.7Flash Key
Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided by your telephone company); or to transfer phone calls when you are using a telephone exchange (PABX).
The flashtime can be selected by the switch on the back of the phone (100/300/600ms). Before changing the flashtime switch, the power supply, batteries and line cord must be removed. (23)
9 Caller ID
9.1General information
When you have a subscription to the Caller ID service, the caller’s phone number and name (when supported by the network) will appear on the display. If you saved the telephone number with the name in the Phone Book, the programmed name will be shown on the display (name tagging function).
9.2Call list
The size of the call list has been set when initializing the telephone. The phone numbers you have received more than once, will not be stored, but the repeat indicator REP will be displayed. Every incoming number is saved in the Call List with indication of date and time.
In standby mode the number of new received calls is shown on the display. The new message LED will blink until you have checked all New messages.
ENGLISH
Topcom Allure 270 | 29 |
