![](/images/new-backgrounds/1251351/25135169x1.webp)
Topcom Allure 270
•To delete the actual message press and hold button during playback of the message.
•To increase the volume during playback, press briefly.
•To decrease the volume, press briefly.
•After you have listened to the new messages, press the and hold to listen to all stored messages.
13.7 Recording a conversation
A conversation of maximum 3 minutes can be recorded.
To start recording, press for 3 seconds. A beep will confirm that the recording started. To end recording, press
again.
To playback, press briefly in standby.
13.8 Memory Full
The display indicates when the memory is full.
When there is a new incomming call when the memory is full, the oldest message will be deleted.
13.9 Remote Operation
The answering machine can be operated remotely using a
13.9.1 Setting the security code
The 4 digit remote code is necessary for remote operation (default: 0123).
To set the code:
•Press for 3 seconds, the display language is shown.
•Press repeatedly until ‘SET REMOTE CODE‘ is displayed.
•Enter the new code by means of the numerical keypad.
•Press confirm.
If no button is pressed within 10 seconds, the unit will return to standby mode.
13.9.2 Using the remote operation
•Call your machine, the unit will turn on after 10 rings and you will hear the OGM message.
•After the beep, slowly dial the Security code, you will hear one short beeps for confirmation.
•Enter the next codes to use the desired function.
ENGLISH
Topcom Allure 270 | 35 |