mmHg
ERROR
TOPCOM BPM Arm 6331
4.When the measurement is completed, systolic, diastolic and pulse will be shown simultaneously on the LCD screen.
When a mistake was detected dur- ing measurement the Error mark appears on the display
ENGLISH
11 Memory
The BPM 6331 has 3 Memory zones. Each can store up to 30 measurements including the date and time The result will be stored automatically in the selected Memory Zone after the measurement.
Select the desired Memory Zone before measurement, by pressing the SET button repeatedly.
To recall measurement results:
•Press the SET button repeatedly to select the desired memory zone.
•Press the MEMORY button to see the average of all measurement results [A].
| • Press the MEMORY button again to see the last |
| measurement result. |
mmHg | • Press the MEMORY button repeatedly for prior |
| values stored. |
| • To stop reading the data, press the START/STOP |
| button to switch back to normal time. |
| To erase all data from one memory zone: |
•Press the SET button repeatedly to select the desired memory zone.
•Press the MEMORY button to see the last measurement result.
•Press the MODE and SET button simultaneously to erase all data from the selected memory zone.
When the batteries are installed, the data in the memories will not be lost even when the Blood Pressure Monitor is switched off.
9
