Topcom HB 6M00 manual Heartbeat Measurement Precautions, Using the Transmitter Belt

TOPCOM HB 6M00 15

9 HEARTBEAT MEASUREMENT

9.1 PRECAUTIONS

•Avoid fastening the strap too tight.

•Do not bend or fold the chest belt for preventing damage.

•Wetting the skin, where there is contact with the conductive area of the chest belt will improve the conduction and get a more stable signal.

•The physical condition of an individual might effect the intensity of measured signal.

•Avoid using the heart rate monitor close to a trolley car, a tram stop, transformer, electric substation and high-tension distribution lines etc. The radio signal will be affected under influence of the environment from high voltage and strong electromagnetic fields.

9.2 USING THE TRANSMITTER BELT

THE CHEST STRAP MUST BE PAIRED WITH THE WATCH. See “6.7 System settings (7 - 9)” for detailed pairing operation.

Fasten the fastener at one end. Try the chest belt on your chest and loosen the stretch band if necessary.

Adjust the length of the stretch band until it feels conformable. The stretch band must cling to the chest. Fasten the fastener at the other end. Adjust the sensor to the center of your chest and be sure the backside of the sensor clings to your chest and touches the skin.

ENGLISH

The chest belt has to be worn while using the heart rate function.