7 DATA COLLECTION
7-3
7.1 Preparation7.1.1 Selecting a File for Data Collection
A file used by data collection mode must be selected at first.
Select a file before beginning data collection mode because selection screen of a file is displayed. And
a selection from data collection menu is possible in the mode.
Operating procedure Operation Display
1Press [F1](DATA COLLECT) key from menu 1/3. [F1]
2Press [F2](LIST) key to display the list of file. *1) [F2]
3Scroll file list by pressing [ ] or [ ] key and
select a file to use. *2),3) [] or [ ]
4Press [F4](ENTER) key.
The file will be set and data collect 1/2 menu will
be shown.
[F4]
*1) If you want to make a new file or input file name directly, press [F1](INPUT) key and enter a file name.
*2) When a file has been selected already, '*' mark is indicated on left of current file name.
*3) Data in a file shown with arrow can be searched by pressing [F2](SRCH) key.
●It is possible to select a file from DATA COLLECT 2/2 menu in the
same way.
MENU 1/3
F1:DATA COLLECT
F2:LAYOUT
F3:MEMORY MGR. P
↓
SELECT A FILE
FN:_________
INPUT LIST ––– ENTER
AMIDATA /M0123
→
*HILDATA /M0345
TOPDATA /M0789
––– SRCH ––– ENTER
TOPDATA /M0789
→
RAPDATA /M0564
SATDATA /M0456
––– SRCH ––– ENTER
DATA COLLECT 1/2
F1:OCC.PT# INPUT
F2:BACKSIGHT
F3:FS/SS P
↓
DATA COLLECT 2/2
F1:SELECT A FILE
F2:PCODE INPUT
F3:CONFIG. P
↓