Topfield TF 7720 HSCI, TF 7710 HSCI manual To use the Hdmi connector

12 Setup

You should configure audio and video settings after connecting up the digital receiver. See § 3.2 for detailed description.

To use the HDMI connector

If you have a high definition television set, you should use a HDMI cable for best re- sults. Plug one end of the cable into the HDMI socket on the digital receiver, and the other end into the matching socket on your televi- sion. In this case, you do not have to make audio connections because the HDMI connec- tor can output stereo audio or Dolby digital audio.

To use the SCART connector

For best results with a standard television set, you should use a SCART cable, plugging one end into the TV socket on the digital receiver and the other end into a free SCART socket on your television.

Some televisions have inputs via Component connector or S-Video connector rather than

SCART.

If you have such a television, use an appropriate conversion ca- ble to link the TV socket on the digital receiver to the matching socket on your television.

If you connect with a standard SCART cable, you do not have to make audio connections because the SCART connector can output stereo audio. But if you use a conversion cable, such as SCART-to-Component, you have to make audio connections.

NOTE

You cannot view high definition video with the SCART connec- tor.