7.4From another digital receiver via RS-232 port 55
7.4 From another digital receiver via RS-232 port
Itis possible to transfer the firmware from the digital receiver
toanother same digital receiver by connecting them with a RS-
232cable. Toupdate the firmware with this method, perform
thefollowing steps:
1. Turn off the target digital receiver.
2.
Plug one end of a RS-232 cable (9 pin D-
subcable) into the RS-232 port on the dig-
ital receiver, and the other end into the
matchingport on the other digital receiver.
3.
Turnon the source digital receiver if not
alreadyon.
4.
Selectthe Installation
>
TransferFirmware
>
TransferFirmware to Other IRD menu,
thenyou get asked for confirmation; select
Yes.
5.
Turnon the target digital receiver to start
thefirmware transfer.
6.
A progress bar appears showing the
progressof the firmware transfer.
7.
Restartthe target digital receiver when the
firmwaretransfer is complete.