4.1Searching broadcasting services 29
4.1.2 ConfiguringDiSEqC 1.2 settings
Yourmotorized antenna will turn toward your desiredsatellites
horizontallyby DiSEqC 1.2.
Whenyou switch to an service, if the service is
provided by a satellite other than current one,
it will take longer time than usual because the
antennahas to turn to its position.
Touse the DiSEqC 1.2 protocol,
select the Installation
>
Motor-
ized DiSEqC 1.2 menu. You
should see a screenlike the left
figure.
At first you have to set the Mo-
torized DiSEqC 1.2 option to En-
able.
Toget the correct position of your desired satellite, perform the
followingsteps:
1.
Choose your desiredsatellite at the Satellite Name op-
tion.
2. Set the DiSEqC Command Mode option to User.
3.
Setthe Motor Control option to Goto. Thenthe antenna
will turn towardyour selected satellite by the position
datathat the digital receiver has.
4.
Ifthe receiving quality, which is displayed at the bottom
rightof the screen, is not good, tune the antenna finely
withthe Movement option. If you set it to 2(E), the an-
tennawill move to the east by two degrees. Atthis time