Pause / Resume Key
The Pause command is used to suspend active program or manual irrigation. The Pause function allows the user to specify the pause duration.
Pause / Resume Function Directions
Pause function example: Program 01 has been manually activated. Pause program 01 for 30 minutes.
1. Press the Pause key.
2. | Use the Input Dial |
|
| to select All, | |||
| |||||||
| are active, use the Right Arrow key | to tab to the program number field before using the Input Dial to | |||||
| select the correct program number. For this example, select Prg: 01. |
|
| ||||
3. | Press the Down Arrow | to advance the cursor to the for: field. Use the Input Dial |
| and the | |||
| |||||||
| Right Arrow key | to select the pause duration in hours and minutes. For this example, set the pause |
duration to 00 hr 30 min. The display should read:
Pause: Prg: 01
for: 00hr 30 min Press PAUSE to pause 00 Programs Paused
Note: The default pause time is 00 hr 05 min minutes.
4. Press the Pause key to initiate the Pause function.
Resume Controller Activity example: Reactivate Program 01 watering.
1. Press the Pause key.
2. Use the Input Dial until the correct program or
For this example, select Resume: Prg: 01.
The display should read:
Resume: Prg: 01
Press PAUSE to pause 01 Programs Paused
3. Press the Pause key to release the Pause function.
17