Changing Nozzle

The TR50XT sprinkler comes with eight additional nozzle sizes from 1 to 9 GPM (4.5 to 41 LPM). To change the nozzle, use the blade end of the sprinkler tool or a screwdriver to turn the nozzle screw out until it clears the nozzle. Pry the nozzle out at the bottom and install the new nozzle. Return the nozzle screw to its previous position.

102-1303

102-1877

Adjusting Spray

Turn the nozzle screw in to diffuse and shorten the spray radius.

Cleaning Screen

Remove and flush screen as needed.

To maintain left stop, align riser with body as shown when reassembling.

Flow Shut Off

Turn the center screw right to shut off flow. Turn the screw left to open flow.

Check Valve

To eliminate check valve function, install the check valve disk in position B.

© 2004 The Toro Company, Irrigation Division • An ISO 9000-certified Company • www.toro.com

Form Number 373-0291 Rev. B

Page 2
Image 2
Toro TR50XT SERIES ROTOR manual Changing Nozzle, Adjusting Spray, Cleaning Screen, Flow Shut Off, Check Valve