Toshiba 14AF41 Adding channels to the TVs memory, Changing channels

Adding channels to the TV’s memory

Your TV will stop on specific channels that are stored in the TV’s

channel memory when you press Channel + or –. Use the steps below

to set all active channels in your area automatically.

Programming channels automatically

Your TV can automatically detect all active channels and store them in

its memory. After the TV has stored the channels in its memory, you

can erase channels or add your favorite channels.

To add channels:

1. Press MENU, then press or to display the SET UP menu.

2. Press ▲ or ▼ until the TV/CABLE

selection is highlighted.

3. Press or to highlight either

TV or CABLE, depending on

which you use.

If you use an antenna, choose TV.

If you use cable, choose CABLE.

4. Press ▼ to select CH PROGRAM.

5. Press or to start channel programming. The TV will automati-

cally cycle through all the TV or Cable channels (depending on

which you selected), and store all active channels in the channel

memory.

While the TV is cycling through the channels, the message

“PROGRAMMING NOW PLEASE WAIT” appears and count up

the received channel.

6. When channel programming is complete, the message “COMPLETED

(channel or cable number)” appears.

7. Press Channel ▲ or ▼ to view the programmed channels.

Adding and erasing channels manually

After you’ve programmed the channels, you can add or erase specific

channels.

To add or erase channels:

1. Select the channel you want to add or erase using Channel + or –.

If adding channels, you must select the channel to add by using the

Channel Number buttons.

2. Press MENU, then press or

to display the SET UP menu.

3. Press ▲ or ▼ to highlight ADD/

ERASE.

4. Press or to select ADD or

ERASE, whichever function you

want to perform.

5. Repeat steps 1-4 for other

channels you want to add or erase.

Changing channels

To change the channel, you can:

•change the programmed channels using the remote control

•select a channel directly using the remote control

•scan the channels using the TV buttons

To change to the next programmed channel:

Press Channel + or – on the TV or remote control.

To change to a specific channel (programmed or unprogrammed):

Press the Channel Number buttons (0-9 and 100).

For example, to select channel 125, press the 100 button, the 2

button, and the 5 button.

Setting up

your TV

PICTURE AUDIO SET UP OPTION

CH PROGRAM

ADD / ERASE

START

ADD

SELECT ADJUST

TV / CABLE TV CABLE

PICTURE AUDIO SET UP OPTION

CH PROGRAM START

SELECT ADJUST

TV / CABLE TV

ADD / ERASE ADD ERASE

POWER

123

456

7890

TV VCR CABLE

CH RTN

ENT

100

–

FAVEXIT RECALL TV/VIDEO

CODE MTS SLEEP MUTE

RESET CAP/TEXT 1/2

MENU/

ENTER

VOL

FAV

VOL

+–

Exit

Channel +/–