Toshiba 1600XP manual On LCD

48

1600XP Series Installation and Operation Manual

1600XP Command Parameters Table

Cmd	Description	Brief Description	Location Map		Example	Rqd Security	By
ID	on LCD					Level to change
			Tab	Block
101	Input Config	Input Configuration which tell the voltage and	Monitor	IN	240V - 60Hz	Nonchangeable	User
		frequency.				Nonchangeable	Administrator
102	No of Input	No of Input Lines	Setting	IN	1 Line	Nonchangeable	User
	Line	- Always 1 input line for 1600XP series				Nonchangeable	Administrator
103	Input Voltage	Input Voltage	Monitor	IN	240 V	Nonchangeable	User
		- UPS presently calculated input voltage				Nonchangeable	Administrator
104	Input Current	Input Current	Monitor	IN	25.0 A	Nonchangeable	User
		- UPS presently calculated input current				Nonchangeable	Administrator
105	Input Fre-	Input Frequency	Monitor	IN	60.0 Hz	Nonchangeable	User
	quency	- UPS presently calculated input frequency				Nonchangeable	Administrator
106	Input Power(W)	Input Active Power	Monitor	IN	5100 W	Nonchangeable	User
		- UPS presently calculated input active power.				Nonchangeable	Administrator
		If UPS can not calculate for input apparent
		Power, display shows N/A.
107	Input	Input Apparent Power	Monitor	IN	6000 VA	Nonchangeable	User
	Power(VA)	- UPS presently calculated input apparent				Nonchangeable	Administrator
		power (input voltage * input current)
108	Input PFactor	Input Power Factor	Monitor	IN	1.0	Nonchangeable	User
		- If converter is not running, display shows N/A.				Nonchangeable	Administrator
111	Rated Vin*	Rated Input Voltage	Setting	IN	240 V	Nonchangeable	User
		- Used to calculate percentage and required to				Changeable	Administrator
		setup properly at very first time startup.
112	Rated Iin	Rated Input Current	Monitor	IN	25.0 A	Nonchangeable	User
		- Use this setup to calculated percentage.				Nonchangeable	Administrator
113	Rated Fin	Rated Input Frequency	Monitor	IN	60.0 Hz	Nonchangeable	User
		- Detected if auto detection and manual				Nonchangeable	Administrator
119	VIOV DeLevel	Input Overvoltage Detection Level	Setting	IN	274 V	Nonchangeable	User
		- Of rated input voltage which was configured				Nonchangeable	Administrator
		with Command ID 111.
120	VIOV ReLevel	Input Overvoltage Recovery Level - Of rated	Setting	IN	264 V	Nonchangeable	User
		input voltage which was configured with Com-				Nonchangeable	Administrator
		mand ID 111.
135	Input Volt-	Input Voltage Percentage	Monitor	IN	100 %	Nonchangeable	User
	age(%)					Nonchangeable	Administrator