DVD Playback
DVD Playback
Playing a disc
This section shows you the basics on how to play a disc.
Basic playback DVD VCD CD
Preparations: When connecting to other equipment, turn the power off.
1.Press POWER on the unit or on the remote control to turn on the unit.
The Power indicator will light.
•Every time you press POWER, the TV/DVD starts from TV mode.
•When using an amplifier, switch on the amplifier.
2.Press TV/DVD on the remote control to select DVD mode.
The DVD startup screen will appear on the screen. (If DVD disc has already loaded, playback will start automatically.)
No Disc
3. Load the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.
Note:
When you playback the 8cm disc, you need an adapter (not supplied).
4.On the TV screen, “No Disc” changes to “Reading” and then playback commences.
No Disc |
|
|
| Reading |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•A menu screen will appear on the TV screen, if the disc has a menu feature.
Press ▲/▼ or 
/
to select title, then press ENTER. Title is selected and play commences.
5.PressVOL+ or – toadjust the volume.
6. Press STOP to end playback.
Resume feature
•Depending on the disc you are playing, when you press STOP one
time, the TV/DVD remembers the scene that was playing (“
” appears on screen). Press PLAY to resume playback from the stopped scene.
•If you press STOP again or eject the disc, the unit will clear the stopped scene (“■” appears on screen).
42
CAUTION
Keep your fingers well clear of the disc slot when disc is loading or unloading. Neglecting to do so may cause serious personal injury.
Power
TV/DVD
Volume +/–
Enter
Play
Stop
Note:
Static electricity may affect the DVD player’s operation and cause it to not work properly. If this happens, turn OFF the POWER, disconnect and then reconnect the AC power cord, and turn ON the unit again.
42 | 6/17/05, 11:01 AM |
