Selecting the video input source
Introduction
Press INPUT to view a signal from another device connected to your TV/ DVD, such as a VCR or DVD player. You can select ANT, VIDEO 1, VIDEO 2, ColorStream HD, HDMI or PC depending on which input jacks you used to connect your devices (see “Connecting your TV/DVD” on page 11).
SOURCE SELECTION
0 . ANT
1 . VIDEO1
2 . VIDEO2
3 . ColorStream HD
4 . HDMI
5 . PC
[0 - 5] : SELECT
Pressing INPUT on the remote control displays the current signal source (press INPUT again or
Please note the following regarding the HDMI source selection:
The HDMI IN jack is not intended for connection to and should not be used with a PC (personal computer). See “Connecting an HDMI or a DVI device to the HDMI input” on page 17 and “Con- necting a PC” on page 20 for details.
your
You also can usetheChannelM / ?buttons to selectthe video input source. In addition to cycling through your programmed channels
(page 24), the Channel M / ? buttons will also cycle through the video input sources, in the order illustrated below.
Labeling the video input sources
The video label feature allows you to label each input source for your TV/DVD from the following preset list of labels:
–: Uses the default label name VCR : Video cassette recorder DVD : DVD video
DTV : Digital TV
SAT : Satellite box
CBL : Cable box
INPUT
TV/DVDConnecting
your TV/DVDSetting up
To label the video input sources:
1.Press MENU, then press 
or 
to display the OPTION menu.
2.Press ▲ or ▼ to highlight VIDEO LABEL.
3.Press 
to display the VIDEO LABEL menu.
4.Press ▲ or ▼ to highlight the video source you want to label.
5.Press 
or 
to select the desired label for that input source.
6.Press EXIT to return to normal viewing.
OPTION |
|
ON TIMER | OFF / OFF / SET |
FAVORITE CH |
|
CH LABEL |
|
VIDEO LABEL |
|
:SELECT | :ADJUST |
VIDEO LABEL |
|
|
| |
1 | . VIDEO1 |
| ||
2 | . VIDEO2 |
| - | SAT / CBL |
3 | . ColorStream | HD | - |
|
4 | . HDMI |
| - |
|
| :SELECT |
|
| :ADJUST |
Exit
Menu
TV/DVD’s FeaturesUsing the
Setting the clock
You must set the clock before you can program the ON timer.
DVD
To set the clock: (Example: 8:30 AM)
1.Press MENU, then press 
or 
to display the SETUP menu.
2.Press ▲ or ▼ to highlight CLOCK SET.
3.Press 
to highlight the hour position.
4.Press ▲ or ▼ to set the hour, then press 
to highlight the minute position.
5.Press ▲ or ▼ to set the minutes, then press EXIT to return to normal viewing.
SETUP |
|
LANGUAGE | ENGLISH |
CLOCK SET | 12 :00AM |
TV / CABLE | CABLE |
CH PROGRAM |
|
ADD / ERASE | ADD |
:SELECT | :ADJUST |
SETUP |
|
LANGUAGE | ENGLISH |
CLOCK SET | 8: 30 AM |
TV / CABLE | CABLE |
CH PROGRAM |
|
ADD / ERASE | ADD |
:SELECT | :ADJUST |
| 31 |
Note:
If the power source for the TV/DVD is interrupted (for example, the power cord is unplugged or a power failure occurs), you will need to reset the clock.
Playback
Appendix
31 | 6/17/05, 11:00 AM |
