222 If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.4.0
Resolving conflicts
There are three things you can do to resolve hardware
conflicts:
Disable the device.
For an older device, remove it from the computer.
Disable another system component and use its resources
for the new device, see “Fixing a problem with Device
Manager” on page 222.
Reconfigure the device so that its requirements do not
conflict. Refer to the device’s documentation for
instructions about changing settings on the device.
Fixing a problem with Device Manager
Device Manager provides a way to check and change the
configuration of a device.
CAUTION: Changing the default settings using Device Manager
can cause other conflicts that make one or more devices unusable.
Device Manager is a configuration tool for advanced users who
understand configuration parameters and the ramifications of
changing them.
Disabling a device
1Click Start, Control Panel, Performance and
Maintenance, Administrative Tools.
2Double-click the Computer Management icon.
3In the left pane, click Device Manager.
4Select the specific device from the device category.
5In the toolbar, look to the far right for an icon of a
monitor with a strike mark through a circle on the front.
This is the disable feature.