1 SpeedTouch™ Installation
8The Setup wizard should find your SpeedTouch™ device on the local network. This is indicated by the following window:
In case more than one SpeedTouch™ device is found, a listing is provided from which you can select your SpeedTouch™.
Note | If the Setup wizard does not find any SpeedTouch™ on the network an | |
| error window pops up. In this case check: | |
| • | Whether the SpeedTouch™ is turned on and fully initialized. |
| • | Whether your PC is correctly connected to the SpeedTouch™ |
|
| and has a valid IP address (i.e. any IP address but 0.0.0.0). |
| • | Whether no dedicated firewall device or router is placed |
|
| between your PC and the SpeedTouch™ and whether no |
|
| personal firewall software is running on your PC. |
To repeat the search for the SpeedTouch™, click Back and proceed with step 7 of this procedure.
9To continue with the configuration of your SpeedTouch™ and your PC, proceed with the configuration procedure described below.
11 | |
|
