1 SpeedTouch™ Installation
The configuration procedure
The Configuration procedure proceeds as follows:
1Once the SpeedTouch™ Setup wizard has detected your SpeedTouch™ device, you can proceed with the configuration procedure.
If more than one SpeedTouch™ device is listed, select the appropriate one. Then, click Next to proceed.
Note | If the SpeedTouch™ has been configured before, it may be protected |
| by a system password. You must provide user name and system pass- |
| word before you can view the device details or continue with the |
| configuration. |
2You will be asked to choose between reconfiguring your SpeedTouch™ or chang- ing your Local Area Network configuration.
Select Reconfigure the SpeedTouch™ and click Next.
3The following window invites you to select the appropriate connection profile for your Internet connectivity:
Select the connection profile of your choice and click Next to continue.
Note | If the Service Provider has included a separate disk with a dedicated |
| connection profile, click Have Disk to navigate to the location of the |
| appropriate connection template file. |
4Subsequent screens will guide you through the configuration setup of both your SpeedTouch™ and/or your PC. Follow the instructions and enter the required information where needed. This information should be provided by your Service Provider.
5In a final step all configurations will be applied to the SpeedTouch™ and your PC. You can follow the configuration progress in following window:
12 | |
|
