5 SpeedTouch™ System Software Upgrade
5While holding the Defaults button, power on the SpeedTouch™ and keep holding the Defaults button until the Power/System, Line Tx and Line Rx LEDs lit green (approximately six seconds). This indicates that the SpeedTouch™ entered BOOTP mode and is sending BOOTP requests.
6The BOOTP server will reply to the BOOTP requests and will perform the required operations to send the system software to the SpeedTouch™.
7After checking whether the received system software is valid for the device, the SpeedTouch™ will start in normal operational mode to complete the upgrade.
8Optionally, you can upload the backup configuration as described in “ System” on page 47.
| 63 |
|
