3 SpeedTouch™ Web Interface

IP Addresses Click this link to display the IP Addresses page.

This page allows you to view or add/delete specific IP address entries for Speed- Touch™'s interfaces:

To add an IP address for one of the SpeedTouch™ interfaces:

1Click New.

2In the Interface field, select the interface to which the IP address applies (use eth0 for assigning to the SpeedTouch™ Ethernet interface).

3In the Address/Mask field, provide IP address and (sub)netmask in IP prefix nota- tion (e.g. 192.6.11.150/24) or select Obtain an IP address automatically for assigning a dynamic IP address to the interface.

4In the Translation field, select NAPT if you want to enable address translation on this IP address.

5Click Apply

6In the SpeedTouch™ web page, click Save all to save your changes to persistent memory.

40

E-SIT-CTC-20030605-0003 v1.0

 

Page 44
Image 44
Technicolor - Thomson 605S manual SIT-CTC-20030605-0003