Manuals / Technicolor - Thomson / Computer Equipment / Network Router

Technicolor - Thomson 605S manual Configuration Setup for other Operating Systems

Models: 605S

1 74

Download 74 pages 56.2 Kb

Page 18

1.3.2Configuration Setup for other Operating Systems

1SpeedTouch™ Installation

1.3.2Configuration Setup for other Operating Systems

Supported Systems As the SpeedTouch™ is OS-independent, this configuration setup can be used by any computer system.

Note	The following procedure may equally be used on MS Windows OSs.

TCP/IP Ensure that your operating system has a valid TCP/IP configuration.

Configure your computer with a static Net10 private IP address, e.g. 10.0.0.1. Ensure, however, that you do NOT use the 10.0.0.138 IP address as this is the default IP address of the SpeedTouch™.

To ensure that IP connectivity exists, you can ping the SpeedTouch™.

Procedure The configuration setup proceeds as follows:

1To ensure that the SpeedTouch™ is in its factory default state, reset the SpeedTouch™ to the default configuration. See “6 Troubleshooting” on page 65.

2Open a web browser and browse to the SpeedTouch™'s default IP address 10.0.0.138. See “3 SpeedTouch™ Web Interface” on page 31 for more informa- tion.

3As a result the SpeedTouch™ System Info web page appears. Expand the Advanced Topics and click Easy Setup.

Note	If the SpeedTouch™ is in factory defaults, the Easy Setup wizard will
	appear automatically.

4The Welcome to the SpeedTouch™ Setup Wizard window appears:

Click Next to continue.

14	E-SIT-CTC-20030605-0003 v1.0

Image 18

Technicolor - Thomson 605S manual Configuration Setup for other Operating Systems

Contents

600 SERIES Business SHDSL Router Setup and User’s Guide Release R4.2SpeedTouch605s Page Setup and User’s Guide Release R4.2 SpeedTouch605sShort Title Setup and Users Guide ST605s R4.2 en Status Change Note PeckelbeenSSpeedTouch Internet Connectivity ContentsSpeedTouch Installation SpeedTouch Web Interface5 SpeedTouch System Software Upgrade Troubleshooting4 SpeedTouch NAPT Manager SpeedTouch Installation Description 1.1 Getting Acquainted with the SpeedTouchIndicator NameIntegrity/Activity Link Integrity/Activity LED 10/100Base -TEthernet wiring Setting up the SpeedTouchWiring procedure PC wiring1.3 SpeedTouch Configuration Setup Microsoft Windows 1.3.1 Configuration Setup for Microsoft Windows Operating SystemsSetup wizard The SpeedTouchClick Initial Setup The detection procedureIf you have already accepted this License Agreement in a previous If the Setup wizard does not find any SpeedTouch on the network an Whether your PC is correctly connected to the SpeedTouchby a system password. You must provide user name and system pass The configuration procedureIf the SpeedTouch has been configured before, it may be protected If the Service Provider has included a separate disk with a dedicatedIn some cases, the SpeedTouch Setup wizard may ask you to restart 1.3.2 Configuration Setup for other Operating Systems The following procedure may equally be used on MS Windows OSsIf the SpeedTouch is in factory defaults, the Easy Setup wizard will You can add services to the Services list by uploading templates See “ Templates” on page 48 for more information on uploadingThe required settings for your computer should be provided by your 1.4 Dr SpeedTouch Installation Dr SpeedTouch allows you to featuresDr SpeedTouch View SpeedTouch605s device information and statusPage 1 SpeedTouch Installation E-SIT-CTC-20030605-0003SpeedTouch Internet Connectivity ponentsSelect Universal Plug and Play and click OK 2.1 Surfing the Internet 2.2 Connect to the Internet via SpeedTouch’s embedded PPP client 2.2.1 Internet Sessions via Windows XP’s UPnP Starting an Internet session via Windows XP’s UPnPTerminating an Internet Session session via Windows XP’s UPnP 2.2.2 Internet Sessions via the SpeedTouch Web Pages all OSs Terminating an opened PPP session2.3 Connect to the Internet via a Broadband Dial-in Client 2.3.1 Using the Windows XP Dial-in Client Select Set up my connection manually and click Next to continueConfiguring a dial-in connection on a Windows XP platform Page Starting a dial-in Internet session from Windows XP 2.3.2 Using the Mac OS X Dial-in Client OS X platformStarting a dial-in connection on a Mac OS X platform Access to the SpeedTouch web interface via UPnP 3 SpeedTouch Web InterfaceAccess to the SpeedTouch web interface Introduction Requirements Use of the SpeedTouch web interfaceSystem Information BASIC topic menuClick ConnectionsADVANCED topic menu 3.1 Basic Topics Menu Links Page 3 SpeedTouch Web Interface System Log Click this link to view the System Log pageE-SIT-CTC-20030605-0003 3.2 Advanced Topics Menu Links 4 Subsequent screens guide you through the configuration setup of both your SpeedTouch and/or your PC. Follow the instructions and enter the required information where needed. This information should be provided by your Service Provider. See “1.3 SpeedTouch Configuration Setup” on page 3 SpeedTouch Web Interface 3 SpeedTouch Web Interface Page NAPT Manager” on page If the NAPT entry is applied to a connections dynamically assigned3 SpeedTouch Web Interface Define a default server Page Page 3 SpeedTouch Web Interface The use of DNS subdomains is supported, e.g. dsl.office.lan Page At the start of the setup procedure, select the desired language. When the setup proce- dure is finished, this language will have been enabled on your SpeedTouch and the language will be available on the SpeedTouch web pages next to english 3 SpeedTouch Web Interface E-SIT-CTC-20030605-0003Click Configuration 4 SpeedTouch NAPT ManagerUsing SpeedTouch NAPT Manager The detection procedure previous session of NAPT Manager, this window will not be shown Click Configure NAT SettingsIf you have already accepted this Software License Agreement in a E-SIT-CTC-20030605-0003your PC is correctly connected to the SpeedTouch and has a It may be protected by a system password. You must provide user name and system password before you can view the device4 NAPT Manager adds the NAPT entry to the list 6 At the end of the procedure the following window appears4 SpeedTouch NAPT Manager Click Next to save the new entries4 SpeedTouch NAPT Manager E-SIT-CTC-20030605-0003System software updates all OSs 5 SpeedTouch System Software Upgrade4 Click Check for new System Software System software updates on a Windows platform Upgrade mechanisms5.1 The SpeedTouch Upgrade Wizard wizard is identical. Proceed as follows5 SpeedTouch System Software Upgrade If the Setup wizard does not find any SpeedTouch on the network an If the Service Provider has included a separate disk with dedicated8 The following window allows you to overview your selection 5 SpeedTouch System Software Upgrade9 You can follow the configuration progress in following window Click Next to continuesoftware management 5.2 Manual System Software Management via BOOTP ServerSpeedTouch system Important note6 The BOOTP server will reply to the BOOTP requests and will perform the required operations to send the system software to the SpeedTouch 5 SpeedTouch System Software Upgrade E-SIT-CTC-20030605-00036 Troubleshooting 6 Troubleshooting6.1 General ProblemSolution 6.2 SpeedTouch Default Configuration Reset to default configuration6 Troubleshooting E-SIT-CTC-20030605-0003Page 600 SERIES Built for excellence