4 SpeedTouch™ NAPT Manager

6NAPT Manager will continue to search for the SpeedTouch™ on the network. The following window shows the detection progress:

7The NAPT manager should find your SpeedTouch™ device on the local network. This is indicated by the following window:

In case more than one SpeedTouch™ device is found, a list with the different devices is shown.Select the SpeedTouch™ of your choice and click Next.

Note

If the Setup wizard does not find any SpeedTouch™ on the network an

 

error window pops up. In this case check that:

 

the SpeedTouch™ is turned on and fully initialized.

 

your PC is correctly connected to the SpeedTouch™ and has a

 

 

valid IP address (i.e. any IP address but 0.0.0.0).

 

no dedicated firewall device or router is placed between your PC

 

 

and the SpeedTouch™

 

no personal firewall software is running on your PC.

 

To repeat the search for the SpeedTouch™, click Back and proceed

 

with step 6 of this procedure.

E-SIT-CTC-20030605-0003 v1.0

53

 

Page 57
Image 57
Technicolor - Thomson 605S manual Error window pops up. In this case check that