Toshiba 26A3000T Connecting your TV, Side connections, Back connections, Connection example

Connecting your TV

Side connections

You can connect a wide variety of auxiliary equipment via the terminals located on the right side of the panel o (2).

Please always refer to the owner’s manual of the equipment to be connected for full details.

Connection example

TV right side view

Camcorder	Video Games	Camcorder with
		S-Video

•To select the side inputs, press o until the video input mode

list appears on the screen, then press U or u to select o2 (- page 19), then press Q.

•Before connecting any external equipment, turn off all main power switches.

•Connect either the S-VIDEOor VIDEO input terminal, whichever terminal is used. Never connect both terminals at a time.

•If you connect mono sound equipment to o (2), connect the audio output of the equipment to the L/MONO jack on the TV.

•You can enjoy Video Games with this TV. However shooting games, where the player shoots at a target on the TV screen with a light gun, may not work because of the LCD Color TV properties.

Back connections

Connection example

TV back view

VCR (Recording)

DVD video player

(with component video outputs)

	Set Top Box
	or
TV back view	HDMI or DVI device

•Before connecting any external equipment, turn off all main power switches.

•The unauthorized recording of television programs, DVDs, video tapes and other materials may infringe upon the provisions of copyright law.

•If you connect both of the COMPONENT VIDEO INPUT terminal and VIDEO input terminal, the COMPONENT VIDEO signal will appear on the screen (display changes to o 1C).

•The COMPONENT VIDEO INPUT consists of three component video signals (Y, PB/CB, PR/CR) and provides the best picture performance. These terminals can only be used with the component video compatible equipment e.g. DVD video player, etc.

•Additional equipment and cables shown are not supplied with this TV.

Connecting an HDMI or a DVI device

•When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

•This TV may not be compatible with features and/or specifications that may be added in the future.

•This TV is only operable with L-PCM on 32/44.1/48 kHz and 16/20/24 bits. If there is no sound when using HDMI, use the analog audio cables to connect the TV and the HDMI device, and select Analog in HDMI audio of the AV connection menu (- page 24).

22