Watching TV programs

Getting started

•To return to the previous menu, press M.

•The U/ u function as the Program position

PB/ Pb when there is no menu display on the screen.

•The I/ i function as the Volume 2+/2– when there is no menu display on the screen.

•In the PC input mode, PC Setting appears in the SET UP menu (- page 30).

•In the 480i or 576i input signals mode, you can select the Cinema mode in the PICTURE menu (- page 19).

•When you use the color management function (- page 19), you can select the Base color adjustment in the PICTURE menu.

Selecting the menu language

Choose from 9 different languages (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or French) for the on-screen display.

1Press M, then press I or i to display SET UP menu.

2Press u or U to select Language.

3Press I or i to select the desired language.

1Enter the desired program position number using the Number buttons on the remote control.

For program positions below 10, use 0 and the required number e.g., for program position 1.

2You can also change the program position by using PB or Pb.

The program position will be displayed on the screen with the Mono/Stereo/Dual audio status.

Note:

The program position selection change between different format channels takes several seconds.

You can switch two program positions without entering actual position number each time.

1Select the ﬁrst program position you want to view.

2Select the second program position with the Number buttons (0-9).

3Press :. The previous channel will be displayed.

Each time you press :, the TV will switch back and forth between the two program positions.

1Press K to display the following on-screen information.

ABCD

Stereo

The information will disappear in 6 seconds.

•Program position or external input mode selected

•Program skip on/off information

•Label (if set)

•Mono/Stereo/Dual audio status

2To erase the display instantly, press K again.