17
Using the TV’s features
PC
Use this setting for PC via HDMI. When receiving
1080p, 1080i or 720p signal format of HDMI
input, this picture size is available.
Notes:
• In the antenna input signal mode, the picture
size selections are Wide, Super Live 2,
Cinema 2, 4:3, Super Live 1, Cinema 1,
Subtitle and 14:9.
• In the PC input mode (- page 23), the picture
size selection is wide or normal only.
• Using the special functions to change the
size of the displayed image (e.g. changing the
height/width ratio) for the purpose of public
display or commercial gain may infringe on
copyright laws.
• If the aspect ratio of the selected format is
different from the one of the TV transmission
or video program, it can cause a difference
in vision. Change to the correct aspect ratio
picture size.
• When using the PC mode, the moving image
quality may be deteriorated.
Using the picture still
• Press r to freeze the picture.
Even if an image is frozen on the TV screen, the
pictures are running on the input source. Audio
continues to be output as well.
To return to a moving picture, press r again.
(Moving) (Still)
Notes:
• If you use this function except for the purpose
of your private viewing and listening, it may
infringe the copyright protected by the copyright
laws.
• In the PC input mode (- page 23), this
function is not available.
Adjusting the picture position
Adjustment to the position of the picture may be
made to suit your viewing preferences.
1 Press M, then press I or i to display the SET
UP menu.
AV connection
Manual tuning OK
OK
Auto tuning OK
Language
SET UP
English
OK
Picture position
MENU
Back Watch TV
EXIT
2 Press u or U to select Picture position.
3 Press Q, then press u or U to select an item
you want to adjust.
Reset
Horizontal position
MENU
Back Watch TV
EXIT
0
Picture position
Vertical position 0
OK
4 Press I or i to adjust the settings as required.
Horizontal position 0
Notes:
• When the picture size is in Wide or 4:3 mode,
only the Horizontal position can be adjusted.
• When the picture size is in PC mode, the
picture position cannot be adjusted.
Resetting the picture position
This function resets your picture position settings
to the factory settings.
1 From the Picture position menu, press u or
U to select Reset.
2 Press Q.